Super energy saving injection molding machine servo energy saving system retrofitting
15 years of professional reform experience create brilliant in market
1. Injection molding machine servo energy saving retrofitting project
The servo system is between the controller and the load, which is used to control the load movement accurately according to the command of the controller. It is mainly composed of servo driver, servo motor, oil pump and sensor.
The Servo control system supply pressure and flux according to the machine’s demand
1.1) When cooling, the motor stops rotating and there is no power consumption.
1.2) When the pressure is maintained, the rated torque of the motor is output, and only the oil leakage in the system is output.
1.3) During the operation, the system only outputs the actual demand without overflow energy loss.
1.4) Flow, pressure closed-loop double control, stability guaranteed, high repetition accuracy.
1.5) Using permanent magnet synchronous motor, the moment of inertia is small, the system response speed is fast, the flow and pressure
1.6) Adjustment is convenient, and all kinds of complex processes are easy to realize.
2. Servo energy saving system Advantage
2.1) Super energy saving: energy saving rate 30%-80%
2.2) Super stability: Widely speed rang and strong overload capacity
2.3) Excellent voltage range: 330V-600V
2.4) Both have motor KTY and PTC overheating protection function
2.5) Many additional green values: Extend the using life of injection molding machine parts, Low noise, Reduce the use of cooling water
2.6) We supply the whole completed servo system:Including servo driver, servo motor, SUMITOMO gear pump, electric cabinet, electric resistance, pressure sensor, magnet ring, press-flow shields semaphore wire, power cable, oil flange, oil suction pipe, semaphore converts board, U-steel and so on
2.7) Fast installation service: 100T-1500T machine takes 2 days to install servo energy saving system; 1500-3000T takes 4 days to install servo energy saving system
2.8) Our team have extensive experiences of servo retrofitting to the machine brandMITSUBISHI,TOSHIBA, NISSEI, JSW, MEIKI, SUMITOMO, UBE, LS, SEIEX, HAITIAN, BORCHE, CHEN-HSONG and so on
3. Servo system Specification
| SEBOS Servo Energy Saving System Specification |
| Servo system model | Pressure | Flux | Servo motor | Pump | Servo driver |
| MPA | L/min | Model | KW | Model | cc/r | Model | KW |
| SES-18067-SNS | 17.5 | 74 | SM065-17Z | 11.6 | QT4N-32 | 32 | SES800Ⅱ-4T15 | 15 |
| SES-18084-SNS | 17.5 | 94 | SM085-17Z | 15.1 | QT4N-40 | 40 | SES800Ⅱ-4T18K | 18 |
| SES-18105-SNS | 17.5 | 118 | SM105-17Z | 18.7 | QT5N-50 | 50 | SES800Ⅱ-4T22 | 22 |
| SES-18132-SNS | 17.5 | 148 | SM145-15Z | 22.8 | QT5N-63 | 63 | SES800Ⅱ-4T30 | 30 |
| SES-18168-SNS | 17.5 | 168 | SM170-17Z | 30.2 | QT6N-80 | 80 | SES800Ⅱ-4T37K | 37 |
| SES-18220-SNS | 17.5 | 220 | SM220-17Z | 39.2 | QT6N-100 | 100 | SES800Ⅱ-4T45 | 45 |
| SES-18275-SNS | 17.5 | 275 | SM270-17Z | 48 | QT6N-125 | 125 | SES800Ⅱ-4T55 | 55 |
| SES-18310-SNS | 17.5 | 310 | SM370-15Z | 58 | QT8N-160 | 160 | SES800Ⅱ-4T75 | 75 |
4. Quality assurance
Production Dectection
Assembling System testing
Packaging Put in storage
5. Promise
If the energy saving rate is not good, don’t need to pay
If the servo system performance is not good, don’t need to pay
If the installation service is not good, don’t need to pay
The desire to save energy is delivered to us, SEBOS is your loyal parter
